Remodeling your stairway can have a dramatic effect on a home since new stair parts will reflect your tastes rather than those of the original builder, who may have lacked creativity and understanding of your personal tastes. The planning process for remodeling a stairway must begin with a qualified stair parts installer who understands the angles and quality of joints that are needed to produce a beautiful stairway.
Here are a few questions to ask a prospective stair installer.
- How many stairways have you installed in the past year?
- Have you worked with this wood species previously?
- Are you willing to make all stair parts cuts outdoors or in the garage?
- Have you installed iron balusters previously?
- Do you have the tools needed such as rail bolt wrenches, dowel drivers and epoxy guns?
If you are satisfied with the answers to these questions ask if you can call some references. If possible view the stair contractors work in more than pictures. It is easy to hide poor workmanship in pictures.
Ordering material for a stair system remodel takes and investment of time. View completed projects portfolios to get your general idea in mind, then consult with a stair specialist. After your initial consultation with the stair specialist, you will want to bring your stair contractor into the conversation about the materials that need to be ordered. The stair contractor may have opinions about which stair parts and tools need to be purchased. Allow 2 or 3 weeks for the manufacture of custom stair components. Custom stair parts are a much better solution and more cost effective when the goal is a nice fitting quality stairway.
When the stair parts arrive open everything immediately and note any damages or variations before the contractor arrives. Allow all of the wood products to acclimate to your home before starting the installation.
Even a simple stairway installation can take a week for contractor to remove and replace stair parts. Give the contractor plenty of time. Most quality stair installers enjoy a quiet work environment where they are free to think and plan out all of the steps that they need to take. Give them space and time. It is not uncommon for a stair installer to take up to 2 hours cutting one piece of wood if it has multiple complex cuts that need to fit to an uneven or irregular surface.
Finish the wood surfaces of the stairs immediately after the installation to give them the best protection and life. Be sure to sand all of the wood surfaces to remove oils and dirt from handling. Sanding also lays down the wood fibers that have raised do to the humidity and moisture in the air. The best protection for wood surfaces are polyurethane finishes.
The cost of the installation for a remodel stairway vary greatly since there are many variables involved in the accessibility of the job site and amount of corrections need to deal with uneven and non-level surfaces. Stair installers are often the most experienced and skilled craftsmen on a job site and command higher hourly wage than most other tradesmen.
This guest post was written by the best online vendor of strong, durable, and top quality stair parts on the internet. To find out more please visit StairSupplies.com here.